Location Content Breakdown

Report Columns

• Address 1 (from Warehouse table)

  Primary address of the warehouse.

• Address 2 (from Warehouse table)

  Secondary address of the warehouse.

• Address 3 (from Warehouse table)

  Third address of the warehouse.

• Address 4 (from Warehouse table)

  Fourth address of the warehouse.

• Address 5 (from Warehouse table)

  Fifth address of the warehouse.

• Block Reason

  Reason for blocking the material in this location from warehouse operations.

• Block Reason (from Carrier table)

  Reason for blocking the material in this location from warehouse operations.

• Block Reason (from Material table)

  Reason for blocking the material from warehouse operations.

• Blocked

  Sets or resets if the material is blocked from warehousing operations, i.e. picking and putting.

  Values:

  0 = False
  1 = True

• Blocked (from Material table)

  Sets or resets if the material is blocked from warehousing operations, i.e. picking and putting.

  Values:

  0 = False
  1 = True

• Blocked for Pick (from Carrier table)

  If the material is blocked from picking.

  Values:

  0 = False
  1 = True

• Blocked for Put (from Carrier table)

  If the material is blocked from putting.

  Values:

  0 = False
  1 = True

• Can Order Point (from Material table)

  The material will be handled in the Material Can-order List, as soon as its stock falls below the entered value.

• Capacity Reserved (from Location table)

  Percentage of location space reserved for allocated materials.

• Capacity Used (from Location table)

  Percentage of location space used by stored materials.

• Cell Name (from Bin table)

  Name of the cell in which the bin is located, e.g. A1.

• Code (from Warehouse table)

  Code assigned to the warehouse.

• Color (from Bin table)

  Color assigned to the bin, in decimal format, e.g. 16777215 for white. Used in the graphical view in location management.

• Count Date (from Location Content table)

  Date and time the material was counted.

• Counting Cycle (from Material Property table)

  Number of days between count orders for a material, assigned by a material property.

• Creation Date

  Date and time the material was created.

• Creation Date (from Material table)

  Date and time the material was created.

• Current Quantity

  Current quantity of one type of material in the location.

• Current Quantity (from Location Content table)

  Current quantity of one type of material in the location.

• Danger Class (from Material Property table)

  Number of the danger class assigned to the material.

• Dedicated Quantity

  The quantity of Pick allocations, either from Manual Picks or allocated Pick Orders, that has not yet been processed.

• Depth (from Bin table)

  Front-to-back dimension of the bin. With Flexcon dividers, this is usually a multiple of 212.5 (2.125" slots), rounded down, e.g. 212 or 637.

• Depth (from Location table)

  Front-to-back dimension of the location.

• Depth (from Shelf table)

  Shelf depth. The preset unit of measurement is millimeters.

• Depth Steps (from Shelf table)

  Shelf depth position is used when applying optical position indicators.

• Description (from Job table)

  Description of the job.

• Description (from Material Property table)

  Description of the material family the material was assigned to, from a dropdown list or tree structure.

• Description (from Storage Unit table)

  Description of the storage unit.

• Description (from Warehouse table)

  Description of the warehouse.

• Expected Quantity (from Location Content table)

  The allocated quantity of Put transactions for a material to this location.

• Fill Quantity (from Material table)

  The amount needed to replenish back to the can-order point.

• Full (from Location table)

  Manually marked as full.

• Gross Depth (from Storage Unit table)

  The outer depth of the storage unit, used for static racks. The preset unit of measurement is millimeters.

• Gross Width (from Storage Unit table)

  The outer width of the storage unit, used for static racks. The preset unit of measurement is millimeters.

• Handling Unit (from Location table)

  The transport tote/container/cart used when processing the order or batch.

• Height (from Bin table)

  Not divider height but height of the highest material in this bin type. Used mainly for Material Storage Rules to group low or high materials together.

• Index (from Carrier table)

  The count index is the starting number of the carrier.

• Info1 (from Material table)

  Information field 1 of the material.

• Info2 (from Material table)

  Information field 2 of the material.

• Info3 (from Material table)

  Information field 3 of the material.

• Info4 (from Material table)

  Information field 4 of the material.

• Info5 (from Material table)

  Information field 5 of the material.

• Inside Depth (from Bin table)

  Inner front-to-back dimension of the bin.

• Inside Width (from Bin table)

  Inner left-to-right dimension of the bin.

• Is Blocked (from Material table)

  Sets or resets if the material is blocked from warehousing operations, i.e. picking and putting.

  Values:

  0 = False
  1 = True

• Lot

  Lot number used by a material property for tracking materials.

• Max Weight (from Carrier table)

  Permitted weight limit of the carrier, if working with weight control. The preset unit of measurement is grams.

• Max Weight (from Storage Unit table)

  Permitted weight limit of the carrier, if working with weight control. The preset unit of measurement is grams.

• Maximum Height (from Shelf table)

  Maximum permitted height of the shelf. The preset unit of measurement is millimeters.

• Maximum Weight (from Shelf table)

  Permitted weight limit of the shelf, if working with weight control. The preset unit of measurement is grams.

• Minimum Height (from Shelf table)

  Minimum permitted height of the shelf. The preset unit of measurement is millimeters.

• Multi Occupancy

  If there is more than one kind of material in the location.

  Values:

  0 = False
  1 = True

• Name (from Bin table)

  Name of the bin. Bins are usually named by size (08×04 or Medium) or by the materials they store.

• Name (from Carrier table)

  Name of the carrier.

• Name (from Job table)

  Name of the job.

• Name (from Location table)

  Name of the location.

• Name (from Material table)

  Name of the material.

• Name (from Material Property table)

  Name of the material property. This should indicate the rule being applied to the material.

• Name (from Shelf table)

  Name or number of the shelf.

• Name (from Storage Unit table)

  Name of the storage unit.

• Name (from Warehouse table)

  Name of the warehouse.

• Name (from Zone table)

  Name of the zone. This should indicate a material property or storage strategy.

• Net Depth (from Storage Unit table)

  The usable depth of the storage unit. The preset unit of measurement is millimeters.

• Net Width (from Storage Unit table)

  The usable width of the storage unit. The preset unit of measurement is millimeters.

• Number (from Carrier table)

  Number of the carrier.

• Number (from Shelf table)

  Number of the shelf.

• Orientation (from Location table)

  Specification that the bin is to be stored on the shelf rotated. Default is 1 (no rotation).

  Values:

  1 = no rotation
  2 = rotated 90º
  3 = rotated 180º
  4 = rotated 270º

• Permitted Quantity (from Location Content table)

  Maximum quantity of stock allowed to be stored in this location.

• Pick Type (from Zone table)

  Zone picking strategy. Default is 1, regardless of zone type.

  Values:

  1 = Turn Over (old first)
  2 = Pick by Location Name
  3 = Pick to Clear (empty bins)

• Production Date

  Used by a material property to track material production date.

• Put Date

  Storage dates for parts, used for tracking "first in, first out."

• Put Type (from Zone table)

  Zone putting strategy. Default is 1, regardless of zone type.

  Values:

  1 = Put by Location Name
  2 = Put to Fill (a partially full bin)

• Qualification

  Used by a material property for tracking materials.

• Quantity (from Location table)

  Current quantity of one type of material in the location.

• Quantity (from Material table)

  Current quantity of the material in storage units.

• Release Date

  Used by a material property to track material release date.

• Reorder Point (from Material table)

  The material will be handled in the Material Re-order List, as soon as its stock falls below the entered value.

• Sequence Number (from Shelf table)

  Assigned by the order in which the shelf was added to the database.

• Serial Number

  Unique serial number, recorded at the item level when a material is add or retrieved.

• Shortage (from Material table)

  The amount needed to replenish back to the reorder point.

• Steps Depth (from Storage Unit table)

  The number of position lights/picklights that are arranged across the depth for this type of storage unit.

• Steps Width (from Storage Unit table)

  The number of position lights/picklights that are arranged across the width for this type of storage unit.

• Storage Date

  Date and time oldest contents were stored.

• Stored (from Material table)

• Total Value (from Material table)

  The number of units multiplied by the value per unit.

• Type (from Bin table)

  Type of bin. Default is 1.

  Values:

  1 = Bin
  2 = Container
  3 = Divisible Bin
  4 = Cell
  5 = Free space

• Type (from Location table)

  Type of location (bin). Default is 1.

  Values:

  1 = Bin
  2 = Container
  3 = Divisible Bin
  4 = Cell
  5 = Free space

• Type (from Storage Unit table)

  Storage unit type.

  Values:

  1 = Static Rack
  2 = Ground Storage
  3 = Vertical Carousel
  4 = Horizontal Carousel
  5 = Shuttle (VLM)
  6 = Single File (Material Flight)
  7 = Material Handling Unit
  8 = Production
  9 = Vertical Buffer

• Unit (from Material table)

  The unit of measurement related to the material, e.g. Piece, lb, mm, Pack, Liter.

• Unit Value (from Material table)

  Value per unit of the material. Used by count orders. Used by count orders.

• Unit Weight (from Material table)

  Weight per unit of the material.

• Width (from Bin table)

  Left-to-right dimension of the bin. With Flexcon dividers, this is usually a multiple of 200 (2" slots).

• Width (from Location table)

  Left-to-right dimension of the location.

• Width (from Shelf table)

  Shelf width. The preset unit of measurement is millimeters.

• Width Steps (from Shelf table)

  Shelf width position is used when applying optical position indicators.

• X-Coordinate (from Location table)

  Width coordinate. Usually a multiple of 200 (2" slots).

• X Coordinate (from Shelf table)

  The x-coordinate of the shelf. Will be 0 unless there is more than one shelf side-by-side on the carrier.

• X Slots (from Bin table)

  Number of 2" slots in the bin's Flexcon divider on the x-axis.

• X Step (from Location table)

  Bin position on the tray on the x-axis.

• Y-Coordinate (from Location table)

  Depth coordinate. Usually multiple of 212.5 (2.125" slots), rounded down, e.g. 850 or 1700.

• Y Coordinate (from Shelf table)

  The y-coordinate of the shelf. Will be 0 unless there is more than one shelf side-by-side on the carrier.

• Y Slots (from Bin table)

  Number of 2.125" slots in the bin's Flexcon divider on the y-axis.

• Y Step (from Location table)

  Bin position on the tray on the y-axis.

• Z Coordinate (from Shelf table)

  The z-coordinate of the shelf. Will be 0 unless there is more than one shelf stacked on the carrier.